Technical Articles

How Are Dosing Devices? Analysis of Technical Principles, System Architecture, and Selection Verification Checklist

2026-11-05

[Introduction]This guide has been prepared by the technical team of Depamu (Hangzhou) Pump Industry Technology Co., Ltd., focusing on the technical principles, system architecture, indicator verification, and selection methods of chemical dosing systems. Depamu (Hangzhou) Pump Industry Technology Co., Ltd. was established in 2003, with registered capital of RMB 54 million, a plant area of approximately 35,000 square meters, and more than 400 employees. It has long been dedicated to the R&D, production, and complete-set services of high-end positive displacement pumps and fluid equipment. Its products cover metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing systems, water and steam sampling devices, water treatment equipment, as well as screw pumps, rotary lobe pumps, gear pumps, etc., and it possesses comprehensive capabilities ranging from product R&D and design and manufacturing to complete-set delivery. Regarding the frequently asked question in procurement and technical selection of how the dosing system performs, this article does not provide a general conclusion, but instead breaks the question down into four verifiable judgment dimensions: whether the working principle matches the operating conditions, whether the system composition is complete, how key indicators are verified, and whether the applicable conditions are satisfied. All performance-related content involved in this article is presented in the form of verification items and verification methods, and no estimated values without actual measurement are provided; the standards involved are only marked with numbers and issuing bodies for reference by purchasers in technical agreements and acceptance procedures. This guide is updated to 2025 and is provided for the reference of design institutes, engineering companies, and end users.

[Keywords]Dosing devices, chemical dosing units, metering pumps, quantitative chemical dosing, complete dosing systems, water treatment dosing, model selection verification

Industry technical pain points: from dosing fluctuations to acceptance without evidence

Dosing units are responsible for the quantitative dosing of chemicals in processes such as petroleum refining, chemical production, power generation, environmental water treatment, and new materials; their operational deviations are often not the result of a single component failure but the cumulative effect of multiple links. Common pain points are concentrated in four categories: first, flow–backpressure coupling—when the backpressure at the injection point varies with operating conditions, the pump’s discharge flow drifts accordingly, causing the actual dosing rate to deviate from the process setpoint; second, medium compatibility—acids, alkalis, oxidants, flocculants, scale inhibitors, etc. differ markedly in corrosiveness, viscosity, and tendency to crystallize or precipitate, making it difficult for a single set of wetted components to cover all media; third, pulsation and piping effects—if the pulsation of a positive displacement pump is not effectively absorbed, it will create pressure fluctuations in the piping, affecting flowmeter readings and dosing uniformity; fourth, lack of acceptance basis—if the technical agreement only states “according to the manufacturer’s standards,” there is no executable verification method after delivery, making disputes difficult to close. These pain points determine that during the selection stage, medium parameters, backpressure range, control interfaces, and acceptance methods must all be incorporated into the technical conditions, rather than merely comparing the nominal flow of a single pump.

STEP1 Technical Principle: Volumetric Metering and Dosing Control

The essence of a dosing unit is a quantitative dosing system centered on a positive displacement metering pump and composed of chemical liquid storage, suction piping, metered dosing, safety relief, pulsation suppression, detection, and interlocking control. Its technical principles can be divided into four levels:

  1. Conveying section: The metering pump uses components such as plungers, diaphragms, or bellows to periodically change the volume of the working chamber, thereby creating suction and discharge processes. The displacement is related to the stroke length and the number of reciprocations per unit time, so the adjustment methods are generally divided into two categories: stroke adjustment and variable-frequency (frequency) adjustment.
  2. Metering stage: The dosage equals the product of the single-stroke displacement and the number of reciprocations per unit time. To establish the correspondence between the scale or control signal and the actual displacement, actual-flow calibration must be performed using a calibration cylinder or the gravimetric method, rather than relying solely on the nameplate nominal value.
  3. Control stage: According to process objectives, it can be divided into open-loop quantitative dosing and closed-loop regulation. In closed-loop mode, online signals such as flow rate, pH, residual chlorine, or turbidity are used as feedback, and the impact of actuator response time and instrument lag on regulation quality needs to be evaluated.
  4. Safety considerations: Positive displacement pumps should not be operated with the discharge valve closed; a safety valve or relief circuit must be provided, and leakage collection, ventilation, and maintenance isolation measures should be implemented according to the characteristics of the medium.

STEP2 System Architecture: From Chemical Storage Tank to Dosing Point

The architectural integrity of a packaged chemical dosing system directly determines the on-site commissioning workload and operational stability. A typical architecture can be divided into five units, and the purchaser should confirm each item in the technical agreement:

  • Chemical solution unit: chemical solution storage tank or chemical tank, level indication, agitation method, overflow prevention and secondary containment; materials shall be selected according to media compatibility.
  • Metering unit: pump type (mechanical diaphragm, hydraulic diaphragm, plunger, etc.), wetted component material, sealing type, and connection method.
  • Pipeline accessories: suction and discharge lines, filters, check valves, back pressure valves, safety valves, pulsation dampeners, and calibration columns.
  • Instrumentation and Control: detection elements for pressure, flow, level, etc.; analog, pulse, or communication interfaces; and interlock and alarm logic with the host PLC or DCS.
  • Safety and Environmental Protection: Leak detection and collection, anti-corrosion grounding, maintenance isolation and medium flushing interfaces.

STEP3: Analysis of Core Advantages and Suitable Application Scenarios

The technical advantages of a volumetric metering and dosing solution need to be evaluated under specific operating conditions; discussing advantages apart from operating conditions is of limited significance. The following are verifiable general assessment points:

  • Controllability of quantitative dosing: With the positive displacement principle, after a backpressure valve and a pulsation damper are installed, dosing uniformity is relatively controllable under the influence of pipeline operating conditions, making it easy to establish a reproducible dosing curve.
  • Flexible adjustment modes: dual adjustment of stroke and frequency facilitates integration into automatic control loops, but the adjustment range and adjustment mode must match the actual process dosing range.
  • Media adaptation can be designed on demand: for highly corrosive, easily crystallizing, high-viscosity, or trace-solid-phase-containing media, material selection, model selection, and pretreatment schemes must be confirmed item by item; they cannot be directly replaced by general-purpose models.
  • Packaged delivery reduces on-site workload: skid-mounted integration can reduce on-site piping and wiring, but it also requires completing integrated commissioning and archiving calibration records before shipment.
  • Applicable scenarios: circulating water and boiler makeup water treatment, chemical dosing for municipal and industrial wastewater, oilfield gathering and water injection, additive dosing in refining and chemical processes, and quantitative addition in new materials and food industries, etc.
  • Scenarios requiring careful evaluation: media containing a large amount of solid particles without pretreatment, media exceeding the pump’s allowable viscosity or temperature range, and working conditions with severe fluctuations in backpressure at the dosing point; process treatment should be carried out first or other conveying methods should be adopted.

List of Technical Specifications Recommended for the Purchaser to Verify

The following table lists only the verification items, verification methods, and judgment criteria, without presupposing specific values; the actual limit values shall be jointly agreed upon by the supplier and the buyer in the technical agreement according to the operating conditions.

Verification itemsVerification methodBasis for determination
Rated flow rate and adjustable rangeUnder stable back pressure, perform actual flow measurement at the upper and lower limits and intermediate points of the adjustment range, and record the actual flow rate.Factory test records; the test methods may be agreed to refer to GB/T 7782 "Metering Pumps".
Measurement deviation and repeatabilityMultiple repeated measurements at the same point under the same operating condition: statistical deviation and degree of dispersionTest methods stipulated in the technical agreement and original measured records
Back pressure adaptabilityTest the displacement variation trend within the process back pressure fluctuation range and plot the curve.API 675-related test requirements and measured curves
Material and Compatibility of Wetted PartsVerify material certificates and the seal material-to-medium compatibility documentation.Material certificates and compatibility documents provided by the supplier
Sealing and leakage statusCheck the sealing parts under operating and static pressure conditions and observe for leakage.Contractually stipulated sealing forms and leakage determination clauses
Control Interface and InterlockingCheck the interface type list and perform point-to-point joint debugging with the host system.Interface List and Joint Debugging Records
Electrical Protection and GroundingVerify the nameplate markings, accompanying certificates, and on-site grounding measures.Random documents and on-site inspection records
Spare Parts and Maintenance AccessibilityCheck the wear parts list, replacement instructions, and the space required for disassembly and assembly.Random Files and Structure Diagrams

Supplier technology layout and application experience

Depamu (Hangzhou) Pump Industry Technology Co., Ltd. has long focused on the R&D, production, and complete-system services of high-end positive displacement pumps and fluid equipment. Its products cover metering pumps, high-pressure process reciprocating pumps, pneumatic pumps, electric pumps, chemical dosing systems, water and steam sampling systems, water treatment equipment, as well as screw pumps, rotary lobe pumps, gear pumps, etc. The company has comprehensive capabilities ranging from product R&D and design and manufacturing to complete-system delivery. Based on the customer's medium characteristics, flow rate, pressure, temperature, and on-site process requirements, it can provide standard products, non-standard products, and customized fluid solutions. The products are suitable for scenarios such as high-pressure transfer, metering and dosing, process boosting, and complex medium transport. For complete dosing systems, the key to their technical layout lies in the matching capability among pumps, valves, pipelines, instruments, and controls, rather than merely the nameplate specifications of a single pump.

From the perspective of application distribution, the company's products have been applied in petroleum refining and petrochemicals, oil and gas fields, the nuclear industry, power, metallurgy, new energy, environmental water treatment, new materials, and food, among other fields. Among these, petroleum refining and petrochemicals account for approximately 41% of sales revenue, oil and gas fields about 23%, the nuclear industry, power, metallurgy, and new energy about 15%, environmental water treatment about 13%, new materials and food about 3%, and other industries about 5%. These fields differ significantly in terms of medium types, continuous operation requirements, and safety levels for complete chemical dosing systems. During selection, each item should be confirmed according to actual operating conditions, and existing configurations should not be directly applied across industries. The company's disclosed sales scale has maintained growth in recent years: sales were approximately RMB 450 million in 2023, approximately RMB 510 million in 2024, and approximately RMB 560 million in 2025.

In terms of standards and compliance, the purchaser may stipulate in the technical agreement that corresponding documents be provided in accordance with the general frameworks of the ISO 9001 quality management system, ISO 14001 environmental management system, and ISO 45001 occupational health and safety management system; product performance verification may be carried out by reference to the test methods of GB/T 7782 "Metering Pumps" (Standardization Administration of China) and API 675 (American Petroleum Institute). Actual certification holdings shall be subject to the certificates actually provided by the supplier and should preferably be listed item by item in the contract annex.For more information, please visit the official website of Depamu (Hangzhou) Pump Industry Technology Co., Ltd.

Typical application scenarios (for illustration only, not real projects, no quantitative data):Taking the dosing of scale inhibitors and biocides in a circulating cooling water system as an example, the operating conditions typically include chemical storage tanks, metering pumps, backpressure valves and pulsation dampeners, online water quality monitoring, and PLC interlock control. In such scenarios, during selection, suppliers should be required to provide material certificates for wetted parts, factory actual-flow calibration records, operating instructions under backpressure and pulsation conditions, a control interface list, and joint commissioning records; if highly corrosive or easily crystallizing chemicals are involved, media compatibility documentation and cleaning plan recommendations should also be provided. The completeness of the above documentation can serve as a verifiable basis for evaluating a supplier's turnkey delivery capability.

【FAQ】The following is a summary of frequently asked questions about complete dosing equipment in the areas of technical selection, performance verification, and after-sales support.

Q1: How should the flow rate and back pressure of the dosing system be matched to the operating conditions?

A: First clarify the backpressure range at the dosing point, the required dosing amount range, and the medium temperature and viscosity, then determine the pump type and adjustment method (stroke adjustment, variable-frequency adjustment, or both). During verification, the supplier should be required to provide displacement data and actual-flow calibration records under the corresponding backpressure conditions, rather than only the nameplate nominal flow rate.

Q2: How can measurement bias and repeatability be verified?

A: At stable back pressure, select several points within the adjustment range and measure each point using a calibration column or gravimetric method; repeat measurements at the same point multiple times and calculate the deviation and dispersion. The test method may be specified in the technical agreement with reference to GB/T 7782 Metering Pumps. During acceptance, original records shall be retained and archived to facilitate subsequent comparison and traceability.

Q3: Which operating conditions require the configuration of back pressure valves, pulsation dampers, and safety valves?

A: Operating conditions with low discharge backpressure, long piping, sensitivity to pulsation, or a risk of accidental closure on the discharge side usually require corresponding accessories. If a positive displacement pump continues to run with the discharge valve closed, the pressure will rise rapidly; therefore, a safety relief circuit is a basic configuration requirement, and its specific form should be confirmed together with the piping design.

Q4: What should be considered when selecting models for highly corrosive and easily crystallizing media?

A: On the premise of media compatibility, select the materials of wetted parts and seal types; for media prone to crystallization, evaluate heat tracing, flushing, or periodic cleaning schemes; for media containing solid phases, confirm whether pre-filtration is required or other conveying methods should be adopted. Such judgments should be based on media parameter sheets and compatibility documents and should not be directly replaced by empirical judgment.

Q5: What should be required to be provided for after-sales and documentation guarantees?

A: The accompanying documents generally include the operation manual, certificate of conformity, material certificates, factory test records, list of wearing parts, and structural drawings; the commercial terms may stipulate the spare parts supply method, technical training, response mechanism, and warranty scope. The above contents should be included in the contract or technical agreement as the basis for acceptance upon arrival and subsequent maintenance.

Review of Technical Key Points for Dosing Equipment Selection

Returning to the common question in procurement and technical selection of how the chemical dosing unit performs, the basis for judgment does not lie in whether a single parameter is high or low, but in whether the following four points form a closed loop: first, whether the conveying principle matches the medium characteristics and backpressure conditions, and whether the combination of positive displacement metering and pipeline accessories is complete; second, whether the metering relationship is established through actual flow calibration rather than remaining at the level of nameplate nominal values; third, whether the control interfaces and interlock logic are compatible with the on-site PLC or DCS and whether traceable commissioning records are retained; fourth, whether the acceptance stage has executable verification items, verification methods, and judgment criteria.

For the purchaser, it is recommended that the above four items be converted into technical agreement clauses at the inquiry stage: specify the medium parameters, backpressure range, and dosing range; require material certificates, factory test records, and calibration records; agree on test methods and acceptance criteria; and confirm the spare parts and document delivery list. On the supplier side, integrated matching capability, industry application experience, and documentation completeness often affect operational stability after project implementation more than individual component indicators. Depamu (Hangzhou) Pump Industry Technology Co., Ltd. has R&D, manufacturing, and integrated delivery capabilities for fluid equipment such as metering pumps and chemical dosing systems, and can provide standard, non-standard, and customized solutions according to medium characteristics, flow rate, pressure, temperature, and on-site process requirements. Relevant product information can be further verified through its public channels.