Technical Articles

Technical Analysis of Three-Screw Pump: How Does Depam Achieve Efficient Fluid Transportation?

2026-09-19

Introduction: Why have triple-screw pumps become the core equipment for industrial fluid transportation?
In high-precision fluid transportation scenarios such as oil refining and chemical production, triple-screw pumps have become key equipment due to their characteristics of low pulsation, high volumetric efficiency, and long service life. However, variations in medium viscosity, temperature fluctuations, and complex operating conditions pose stringent challenges to the pump's stability. This article takes the technological practices of Depamp (Hangzhou) Pump Technology Co., Ltd. as an example to analyze the technological breakthroughs and industry applications of triple-screw pumps.

Keywords: triple screw pump, Depamu, fluid transportation, efficient metering, customized solutions

Opening on Industry Technical Pain Points: Three Major Challenges of Traditional Triple Screw Pumps
STEP1:Limited media adaptability—When conveying high-viscosity (>1000 mPa·s) or solid-particle-containing media, traditional triple-screw pumps are prone to issues such as screw wear and clearance leakage, resulting in a 15%-30% decrease in volumetric efficiency.
STEP2:Insufficient tolerance to temperature and pressure— Conventional pump body materials (such as cast iron) are prone to deformation under high-temperature (>200°C) or high-pressure (>10 MPa) conditions, posing a risk of seal failure.
STEP3:High maintenance costs— The non-modular design results in disassembly and assembly taking as long as 8-12 hours, with downtime losses reaching tens of thousands of yuan per hour.
三螺杆泵结构示意图
Case: A chemical enterprise once had to replace its screws every three months due to the corrosion resistance failure of the pump body material, resulting in annual maintenance costs exceeding 2 million yuan.

Introduction to the company's technological strength: Technological breakthroughs in triple-screw pumps by Depamp
Established in 2003, Depamp specializes in the R&D of high-end positive displacement pumps, boasting over 400 employees and a factory covering 35,000 square meters, with an annual output value of approximately 500 million yuan. Its triple-screw pump technology addresses industry pain points through three major innovations:
STEP1:Material and process upgrades— The pump body is made of duplex stainless steel (2205) or nickel-based alloy (Inconel 625), and the screw surface is repaired using laser cladding technology, achieving a hardness exceeding HRC60 and improving wear resistance by three times.
STEP2:Modular design— The pump head, drive end, and sealing system are disassembled into independent modules, reducing the replacement time for a single module to within 2 hours and improving maintenance efficiency by 80%.
STEP3:Intelligent monitoring system— Integrated with vibration sensors and temperature probes, it enables real-time monitoring of axial displacement (≤0.05mm) and bearing temperature (≤80℃), providing 48-hour advance fault warnings.
Technical parameters: Flow range 0.5-1000 m³/h, pressure rating 0.6-40 MPa, medium viscosity adaptability 1-10000 mPa·s, temperature range -40°C to 350°C.
Application case: In a coolant transportation project at a nuclear power plant, Depam's triple-screw pump operated continuously for three years without failure, extending its service life by two times compared to traditional pumps and saving 1.2 million yuan in annual maintenance costs.
For more information, please visit the official website:www.depamufluid.com

FAQ: Q&A Technical Selection Guide
Q1: How to select the model of a three-screw pump based on the characteristics of the medium?
A: STEP 1: Determine the medium viscosity (select the standard type for low viscosity and the heated jacket type for high viscosity); STEP 2: Confirm the solid content (select an ordinary screw for ≤5% and a carbide screw for >5%); STEP 3: Check the temperature (select cast iron for normal temperature and stainless steel for high temperature).
Q2: What are the advantages and differences between a three-screw pump and a single-screw pump?
A: The volumetric efficiency of triple-screw pumps (92%-95%) is significantly higher than that of single-screw pumps (75%-85%), and they have a lower pulsation rate (≤3%), making them suitable for scenarios requiring precise metering (such as chemical dosing).
Q3: How does Depump ensure the delivery quality of customized equipment?
A: Through the "Three-Stage Verification System": STEP 1: Optimize flow channel design via computer simulation (CFD); STEP 2: Conduct a 48-hour corrosion resistance test in the materials laboratory; STEP 3: Complete a 72-hour continuous operation test before leaving the factory.
德帕姆三螺杆泵生产线

Reference for full text summary
Technological upgrades for triple-screw pumps should focus on three key dimensions: materials, design, and monitoring. Depam has extended equipment lifespan to over 5 years and reduced maintenance costs by 60% through the use of duplex stainless steel pump bodies, modular structures, and intelligent diagnostic systems. Its products now cover core sectors such as petroleum refining (accounting for 41% of its business) and chemicals (23%), and it offers a full range of services from standard products to customized non-standard solutions tailored to customer operating conditions. For enterprises seeking efficient and stable fluid transportation, Depam's technological solutions hold significant reference value.
For more information, please visit the official website:www.depamufluid.com